Conveyor belt

Designed for transportation of ores, rocks in pieces up to 500 mm, logs up to 900 mm in diameter, raw coal, clay, low-grade materials, containing oil, grease and pitch.

Designed for transportation of ores, rocks in pieces up to 500 mm, logs up to 900 mm in diameter, raw coal, clay, low-grade materials at ambient temperature from -60 ° C to + 60 ° C.

Designed for transportation of materials with temperature 400°C and with various abrasion.

Designed for transportation of bulk, lump and packaged materials on industrial facilities, working in fire- and explosive-hazardous productions in order to dissipate static electricity charges.

Designed for transportation of ores, rocks in pieces up to 500 mm, logs up to 900 mm in diameter, raw coal, clay, low-grade materials with weak acidic or weak alkali media (up to 20 E).

Designed for transportation of coal, ore, rock mass on belt conveyors, installed at inclination angle from -16 to 18°, in coal and shale mines, including hazardous ones for gas and dust.

Designed for transportation of highly abrasive sharp-edged materials, with high resistance to rips, wear and cleaning procedures. Abrasion-resistance 90 mm3.

Designed for operating conditions, requiring application of enhanced strength conveyor belts. Rubber steel cord belts are based on the steel reinforcing cords of different length, providing high tensile strength. To be operated at the ambient temperature from -25°C to +60°C.

For heavy duty operating conditions the conveyor belts are manufactured with protective breaker layer, providing the protection of belt surface from impact loads and longitudinal cuts. Conveyor belts are charachterized by the increased fire-safety properties and recommended for operating at main and local mine workings hazardous for dust and gas.

Designed for transportation of ores, rocks in pieces up to 500 mm, logs up to 900 mm in diameter, raw coal, clay, low-grade materials, containing oil, grease and pitch with temperature up to 200°C.