Cold-resistant rubber-textile conveyor belt

Area of application:
Designed for transportation of ores, rocks in pieces up to 500 mm, logs up to 900 mm in diameter, raw coal, clay, low-grade materials at ambient temperature from -60 ° C to + 60 ° C.
Applied elastomer: M
1.2M– heavy-duty design (with breaker layer)
2M– for medium operating conditions
2ЛМ – for light operating conditions
Edge type: РБ – molded edge; НБ – cut edge.
* Product characteristics are for informational purposes only, when ordering, please check with the managers of our company.
Belt type | Fabric lining type | Number of linings | Rupture strength as per N/mm | Edge type |
---|---|---|---|---|
1.2М, 2М | ЕР-200 | 4 | 800 | РБ, НБ |
1.2М, 2М | ЕР-200 | 5 | 1000 | РБ, НБ |
1.2М, 2М | ЕР-200 | 6 | 1200 | РБ |
1.2М, 2М | ТЛК-250-МА, ЕР-250 | 3 | 750 | РБ, НБ |
1.2М, 2М | ТЛК-250-МА, ЕР-250 | 4 | 1000 | РБ |
1.2М, 2М | ТЛК-250-МА, ЕР-250 | 5 | 1250 | РБ |
1.2М, 2М | ТЛК-250-МА, ЕР-250 | 6 | 1500 | РБ |
1.2М, 2М | ТК-300-2 | 3 | 900 | РБ, НБ |
1.2М, 2М | ТК-300-2 | 4 | 1200 | РБ |
1.2М, 2М | ТК-300-2 | 5 | 1500 | РБ |
1.2М, 2М | ТК-300-2 | 6 | 1800 | РБ |
1.2М, 2М | ТЛК-315, ЕР-315 | 3 | 900 | РБ |
1.2М, 2М | ТЛК-315, ЕР-315 | 4 | 1200 | РБ |
1.2М, 2М | ТЛК-315, ЕР-315 | 5 | 1500 | РБ |
1.2М, 2М | ТЛК-315, ЕР-315 | 6 | 1800 | РБ |
1.2М, 2М | ТЛК-400-2, ЕР-400 | 3 | 1200 | РБ |
1.2М, 2М | ТЛК-400-2, ЕР-400 | 4 | 1600 | РБ |
1.2М, 2М | ТЛК-400-2, ЕР-400 | 5 | 2000 | РБ |
1.2М, 2М | ЕР-500 | 3 | 1500 | РБ |
1.2М, 2М | ЕР-500 | 4 | 2000 | РБ |
1.2М, 2М | ЕР-500 | 5 | 2500 | РБ |
1.2М, 2М | ЕР-630 | 4 | 2500 | РБ |
1.2М, 2М | ЕР-630 | 5 | 3150 | РБ |
2ЛМ | БКНЛ-65-2 | 3 | 165 | НБ |
2ЛМ | БКНЛ-65-2 | 4 | 220 | НБ |
2ЛМ | БКНЛ-65-2 | 5 | 275 | НБ |
2ЛМ | БКНЛ-65-2 | 6 | 330 | НБ |
2ЛМ | ТК-200-2, ТЛК-200-МА | 3 | 600 | НБ |
2ЛМ | ЕР-200 | 4 | 800 | НБ |
2ЛМ | ЕР-200 | 5 | 1000 | НБ |
Similar products
Designed for operating conditions, requiring application of enhanced strength conveyor belts. Rubber steel cord belts are based on the steel reinforcing cords of different length, providing high tensile strength. To be operated at the ambient temperature from -60°C to +60°C.
Designed for transportation of highly abrasive sharp-edged materials, with high resistance to rips, wear and cleaning procedures. Abrasion-resistance 90 mm3.