Lens compensator
Lens expansion joints can accommodate angular, axial displacements, vibration loads and temperature stresses.
Supplied with swivel flanges with or without restrictive studs.
Specifications
The inner layer of the expansion joint is made of wear-resistant rubber compound.
It is made on the basis of cord fabric,
providing high strength of the product.
Product name | Internal diameter, mm | Length, m | Acceptable displacements | Working pressure, MPa | |||
---|---|---|---|---|---|---|---|
d | L | Compression, mm | Stretching, mm | Offset, mm | Angle, degrees | ||
RC102 | 102 | 150 | 30 | 20 | 20 | 25 | max 1,6 |
RC114 | 114 | 150 | 30 | 20 | 20 | 20 | max 1,6 |
RC133 | 133 | 150 | 30 | 20 | 20 | 15 | max 1,6 |
RC150 | 150 | 150 | 30 | 20 | 20 | 15 | max 1,6 |
RC159 | 159 | 180 | 30 | 20 | 20 | 15 | max 1,6 |
RC170 | 170 | 180 | 30 | 20 | 20 | 15 | max 1,6 |
RC200 | 200 | 200 | 30 | 20 | 20 | 15 | max 1,6 |
RC219 | 219 | 200 | 30 | 20 | 20 | 15 | max 1,6 |
RC245 | 245 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC273 | 273 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC300 | 300 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC325 | 325 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC351 | 351 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC377 | 377 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC 402 | 402 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC426 | 426 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC457 | 457 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC508 | 508 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC530 | 530 | 200 | 30 | 20 | 20 | 10 | max 1,6 |
RC600 | 600 | 200 | 30 | 20 | 20 | 6 | max 1,6 |