close
close

Send CV

Send
close
close
8 (800) 505-98-70
Free call from Russia

Branch pipe with increased bending radius

Rubber branch pipes are used for the transportation of slurry at the facilities of extremely wear of pipeline systems, where normal flexible pipelines cannot be bended for the necessary angle.

Characteristics

Rubber branch pipes have low flow resistance and provide long service life

Produced on the basis of cord fabric with reinforcing spiral of steel wire to ensure triple safety margin of working pressure

Designed for hydraulic and pneumatic pumping of abrasive materials and fluids, lean non-organic acid and alkali in vacuum, pressure and discharge lines (at grinding, floatation, separation, tailing facilities and other units of mining and processing plants)

Flange type: with embedded flange and with swivel flange

Branch pipe angle: 30°, 45°, 60°, 75°, 90°.

Product name Internal diameter, mm Wear-resistant layer, mm Working pressure, MPa Vacuum, MPa AxB, mm Bending radius, mm
RBF-102 102 13 max 1,6 -0,08 365x365 300
RBF-114 114 13 max 1,6 -0,08 415x415 350
RBF-133 133 13 max 1,6 -0,08 465x465 400
RBF-152 152 13 до 1,6 -0,08 515x515 450
RBF-159 159 13 до 1,6 -0,08 545x545 480
RBF-170 170 13 max 1,6 -0,08 575x575 510
RBF-200 200 13 max 1,6 -0,08 665x665 600
RBF-219 219 13 max 1,6 -0,08 725x725 660
RBF-245 245 13 max 1,6 -0,08 815x815 750
RBF-273 273 13 max 1,6 -0,08 885x885 820
RBF-300 300 13 max 1,6 -0,08 965x965 900
RBF-325 325 13 max 1,6 -0,08 1040x1040 975
RBF-351 351 13 max 1,6 -0,08 1115x1115 1050
RBF-377 377 13 max 1,6 -0,08 1195x1195 1130
RBF-402 402 13 max 1,6 -0,08 1265x1265 1200
RBF-426 426 13 max 1,6 -0,08 1345x1345 1280
RBF-457 457 13 max 1,6 -0,08 1435x1435 1370
RBF-508 508 13 max 1,6 -0,08 1615x1615 1520
RBF-530 530 13 max 1,6 -0,08 1655x1655 1590
RBF-610 610 15 max 1,6 -0,08 1895x1895 1830