close
close

Send CV

Send
close
close
8 (800) 505-98-70
Free call from Russia

Rubber branch pipe

Rubber branch pipes are used for the transportation of slurry at the facilities of extremely wear of pipeline systems, where normal flexible pipelines cannot be bended for the necessary angle.

Characteristics

Rubber branch pipes have low flow resistance and provide long service life

Produced on the basis of cord fabric with reinforcing spiral of steel wire to ensure triple safety margin of working pressure.

Designed for hydraulic and pneumatic pumping of abrasive materials and fluids, lean non-organic acid and alkali in vacuum, pressure and discharge lines (at grinding, flotation, separation, tailing facilities and other units of mining and processing plants).

Flange type: with embedded flange and with swivel flange.

Branch pipe angle: 30°, 45°, 60°, 75°, 90°.

Product name Internal diameter, mm Wear-resistant layer, mm Working pressure, MPa Vacuum, MPa AxB, mm Bending radius, mm
RB-102 102 13 до 1.6 -0.08 290x290 225
RB-114 114 13 max 1.6 -0.08 290x290 225
RB-133 133 13 max 1.6 -0.08 290x290 225
RB-152 152 13 max 1.6 -0.08 290x290 225
RB-159 159 13 max 1.6 -0.08 290x290 225
RB-170 170 13 max 1.6 -0.08 290x290 225
RB-200 200 13 max 1.6 -0.08 365x365 300
RB-219 219 13 max 1.6 -0.08 365x365 300
RB-245 245 13 max 1.6 -0.08 440x440 375
RB-273 273 13 max 1.6 -0.08 440x440 375
RB-300 300 13 max 1.6 -0.08 515x515 450
RB-325 325 13 max 1.6 -0.08 515x515 450
RB-351 351 13 max 1.6 -0.08 590x590 525
RB-377 377 13 max 1.6 -0.08 590x590 525
RB-402 402 13 max 1.6 -0.08 665x665 600
RB-426 426 13 max 1.6 -0.08 665x665 600
RB-457 457 13 max 1.6 -0.06 765x765 700
RB-508 508 13 max 1.6 -0.04 815x815 750
RB-530 530 13 max 1.6 -0.04 815x815 750
RB-610 610 15 max 1.6 -0.03 965x965 900